Leg Bracing for Stainless Sink Bench

Leg bracing ties the legs of a stainless bench together near the floor, turning four separate legs into a rigid frame. Without it a long bench racks sideways under load — noticeable the first time someone leans on it.

It matters most on sink benches, which carry the weight of water as well as the bench itself, and on any run over 1500mm.

Bracing is sized to the bench. A brace cut for a 1800mm frame will not fit a 2400mm one, and the 600mm and 700mm depth series are not interchangeable either. Order against the bench model code.

Modular Systems supplies the range. See the LB7-1800HS/1 leg bracing and the LB6-2400HS/1.

If you have the bench model number, send it through and we will confirm which brace fits before you order.

This range is part of our wider commercial kitchen equipment catalogue. If you are fitting out, send us the full list and we will price it together rather than unit by unit.